![epson 3880 printer will not feed 4x6 paper continously epson 3880 printer will not feed 4x6 paper continously](https://www.photoreview.com.au/wp-content/uploads/images/media/images/3880-speed/112381-1-eng-GB/3880-speed.jpg)
- EPSON 3880 PRINTER WILL NOT FEED 4X6 PAPER CONTINOUSLY MANUAL
- EPSON 3880 PRINTER WILL NOT FEED 4X6 PAPER CONTINOUSLY PRO
If it does, you can push the metal frame that is just behind them in a bit, push the white plastic pieces in and up with a piece of cardboard wide enough to push both flaps up together, and then let the frame back out. Optional: The 2 little white hinged flaps that are visible in the preceding picture shouldn’t be a problem unless your film curls up too much.It’s not really necessary to tape it in place. The piece I used here came from a roll so it has a slight downward curl. Finally, take a strip of film or smooth paper the width of the eject tray opening (17 inches) by 3-4 inches and place it so that it acts as a bridge to prevent the exiting film from sliding below the Front Feed Tray which is left in the open position.
![epson 3880 printer will not feed 4x6 paper continously epson 3880 printer will not feed 4x6 paper continously](https://miro.medium.com/max/768/1*jErnWaNKlrDNkDaraT2pCw.jpeg)
EPSON 3880 PRINTER WILL NOT FEED 4X6 PAPER CONTINOUSLY MANUAL
That way we can use the Manual Rear Feed or even the Auto Feed but the star-wheels will not be lowered. What we need to do here is to hold it in the closed position so that the printer thinks the Front Feed is closed even though it is not. It is small and well hidden, and a bit tricky to see at first. When the tray is closed the cam lifts it. There is a Leaf Switch behind the large white plastic cam near the right side of the opening.On the left side you will see the Front Left Housing Cover which is secured by one screw at the upper right. Remove the screw, tilt the cover towards you from the top, and remove it.Open the Paper Eject Tray Cover and the Front Feed Tray.We take advantage of the retracted position of the star-wheel mechanism when the Front Feed is in use by tricking the printer into thinking that the Front Feed is closed even though it is in the open position. Here is a way to disable the star-wheels without having to make any permanent modifications to the printer. I have 2 3880s on one of them the Front Feed works perfectly with the Pictorico Ultra Premium OHP transparency film that I use for digital negatives, but in the other it doesn’t. One way of avoiding this is to use the Manual Front Feed mechanism which does not engage the star-wheels. The problem with this is that the Front Feed is designed for very thick materials like poster board, and doesn’t always handle thinner materials well. However, it has one potential drawback which is that the star-wheels on the eject path of the paper transport mechanism can leave a trail of pin-prick dots on the printed surface of the negative, or any glossy surface.
EPSON 3880 PRINTER WILL NOT FEED 4X6 PAPER CONTINOUSLY PRO
The Epson Stylus Pro 3880 (and the 3800 before it) has been one of the best and most popular printers for making high quality digital negatives for contact printing using various alternative photographic printing processes.